Preventable errors cause machine failure which affects more than 20% of aircraft crashes. This presents a series of avoidable problems. One of the most common issues aircraft inspections catch is incorrect component installation.
There are also discrepancies with electrical wiring that are often identified. These are the primary reasons for working with an aircraft maintenance company. Regular maintenance limits the chance of missing common issues in pre-inspection checks.
It also lessens the risks involved with aircraft towing. Fuselage issues that may arise are also reduced. Businesses know that most crashes are caused by preventable machine failures.
To combat this, it's best to develop a quality assurance system. Developing a maintenance plan simplifies the implementation of this type of assurance check.
Below, we outline the benefits an aircraft maintenance service can provide.
Avoid Misplaced Maintenance
Basic inspections will typically occur every 48 hours for a plane. More extensive inspections can take place one or more times throughout the year.
Periodic upkeep helps to avoid operational damage. However, this isn't something your clients can always foresee.
A lot of the time, if something goes wrong, an aircraft can be temporarily fixed. They can also be maintained in between stops.
Or, it can be repaired back to a serviceable status before its next flight time. An aircraft maintenance company helps to avoid misplacing maintenance when it's needed. Whether the aircraft is in its primary hangar or not, maintenance won't be misplaced.
Operational Hand-Off
An aircraft maintenance company ensures that your aircraft remains serviceable during its lifespan. Regular inspections allow you to catch malfunctions before they become an operational problem.
A specialized company takes over the initial maintenance needs of the aircraft. They also take over anything that follows including annual inspections and unexpected incidents.
A fifth of plane crashes are almost solely due to maintenance factors. Primary aircraft component maintenance determines the entire safety rating of the aircraft.
This is why component health is essential during inspections. Each of these aspects will help reduce the chance of engine trouble. It will also reduce the chance of complete failure during flights.
Aircraft owners won't just have access to maintenance services alone. They will also have access to repair and overhaul services as well. If an aircraft needs to be taken down, this is something else that can be handed off.
Consider engine and APU repairs. Also, consider aircraft acquisitions. Some companies include each of these services and act as a full-service provider.
Optimized Efficiency and Budget Control
Managing operation expenditure is a top reason for proactive aircraft maintenance. Investing in preventative maintenance can be a steep upfront expense when not planned. Even more basic models, like a Boeing 737, could cost anywhere from $7,453.96 per hour to operate depending on the flight.
Price spikes beyond this can be avoidable. This is if immediate repair or replacements aren't needed. However, comprehensive inspections offer more budget control and financial insights long term.
In inspections, other models could range from $600 to 1,200. Inspections could cost upwards of $2,000 to over $2,500 for other models. Between operational costs and annual inspections, clients would prefer budget monitoring.
The right type of maintenance can lead to a longer lifespan for your aircraft. It can even optimize component performance. All of this contributes to reduced operational costs.
For example, a high-end private plane is recommended to be serviced every 1,000 hours. For high-end engines, specifically, the oil should be changed every 5-hour cycle. The maintenance schedule depends on the type of engine and how frequently it flies.
Aircraft owners have to consider what factors are most affected by aircraft performance. Some of these factors could be the payload, the speed of the aircraft, and its stability.
The rate of climb and the takeoff and landing distance are also affected. These are all reasons to have an aircraft maintenance technician perform all inspections.
This is significantly important if a client is flying frequently on a commuter basis. This just means the plane's frequency of use is higher.
Performance Enhancement
Proactive maintenance goes beyond safety and cost-saving measures. It also plays a primary role in enhancing the overall performance of the aircraft. A well-maintained aircraft operates more efficiently and consumes less fuel.
Businesses can then expect higher customer satisfaction ratings from this. This can be beneficial if you are a private plane company. This is additionally beneficial if you have a consistent high-paying clientele list.
Avoiding Productivity Loss
What is controllable is the condition of an aircraft in terms of routine maintenance. Rigorous maintenance plans prevent premature component wear and tear. New parts can cost tens of thousands of dollars to replace, if not more.
One of the top causes of plane equipment failures is issues with the fuel system. A 'flyable' plane doesn't always mean the aircraft should fly. A reputable company will flag these issues.
Aircraft Maintenance Regulations
Regulations for aircraft maintenance can be difficult to keep up with. This often depends on the variety of the fleet. Most of the time, preventative maintenance is needed every 25 hours of flight time. These regulations could also include compliance with 100-hour inspections.
The type of maintenance you will need will depend on the aircraft and its class. Most of the time, you will need one of three types:
• Line maintenance
• Heavy maintenance
• Component maintenance
Heavy maintenance is a more thorough approach. This could involve part replacements and full inspections.
Line maintenance is more of a minor approach. This will include pre-flight checks and addressing minor repair needs.
Component maintenance involves any component-specific modifications. This also involves specific repair or replacement needs.
You can also ensure you have an efficient inspection when turnaround times are reduced. Professional aircraft technicians help to optimize maintenance this way and at an affordable price.
An Aircraft Maintenance Company That Puts Safety First
An aircraft maintenance company offers high-quality safety assurances. This can include landing gear and brake checks. It can also include full-frame inspections.
Without proper maintenance, you run the risk of experiencing diminished performance. You also risk costly replacements or repairs. All of which can reduce client retention.
Learn about maintenance services offered by MIAVIA today to enhance the longevity and safety of your client's aircraft.
